Di’s Digis – Another resource for Adorable!

This week’s challenge over at  C4C – 423 Crazy 4 Challenges is to make a card with a yummy dessert on it!  My Design Team inspiration card this week is one of several images I bought from a digital stamp designer that is new for me.  On the Kit and Clowder Facebook Page I saw one of the Clowdies posted a card made with an image I just loved.  So much so I went over to Di’s Digi Stamps  and bought several digital stamps.  I chose this one for my card. It’s called “Ellies strawberry cupcake”

2018-02-20 19.12.26

I mean seriously, how cute is this!  Please, if you like digital stamps, and you love “cutsie” like me, do yourself a favor and look around this site.  I’ll be featuring the others in the next few week’s (again, I am not compensated in any way by my referrals.  I just love to pass on to you what I call a “SCORE”!  Here’s the link Di’s Digi Stamps

Let’s make this easy  card

The Steps:

Step 1:  Size, print and color the image.  I colored with Copic Markers.  I also added “Chrystal Lacquer” to the elephant’s eyes and the dripping chocolate and cherry available at Amazon.  Now cut out the image using the third to the largest die in the set below  from Elizabeth Craft Designs.

2017-12-04 15.04.47

Step 2:  Using the same die set pictured above, cut a lavender cardstock mat using the second to the largest die.

Step 3:  Cut a mat out of darker lavender or purple cardstock using the largest die from the set below:

2017-07-30 12.38.42

Step 4:  Using the die set below cut all the pieces to make the smallest strawberry and the small leaves.

2016-07-06 21.57.43

Step 5:  Cut the pieces of one of the cup cakes from this die set below:

2017-08-16 13.10.32

Step 6:  Cut the word Celebrate from the die set below:

2018-02-22 19.43.57

Step 7:  Make the base card by scoring an 8.5″ x 11″ pc, of white cardstock at 8.5″ on the long side.  Fold over and trim to 7″ x 5.5″.  Now cut a rectangle from designer paper that measures 6.75″ x 5.25″.   Now assemble all the elements (pic. below) to the front of your base card.  Note: I added a little flower to the strawberries with a die referenced in the other products used.

That’s it!

Thanks so much for taking a look and I hope you’ll make a card for this week’s challenge.

Other products Used:

Elizabeth Craft Designs:  White Soft finish Cardstock, 1181 Pinwheel (little white flower on strawberries), Clear double sided Adhesive

Beacons Kid Choice glue

Sizzix Big Shot Plus

 

 

 

 

C4C 420 Show us a heart

This week’s theme for the “Crazies” challenge is to show us a “heart”!  There are so many ways you could make a card with this theme.  I decided to make a Valentines Card.

2018-01-29 C4C final

If you’ve been following me, and please do, then you know I am so crazy for digital images from The Paper Shelter.  This adorable image is literally called “How you doin?” and I couldn’t think of a better sentiment!

Let’s make the card:

Step 1:  Size, print and color the image on cardstock with Copic Markers.  My new absolute favorite paper is this one that I learned about on the Kit and Clowder website:

2018-01-29 12.23.15

                This paper alone will make your coloring better.  I got mine at Amazon.

Step 2:  Using this die set from Elizabeth Craft Designs cut twice.  Once with white cardstock and once with hot pink (cut the hot pink second and leave in the die. (you’ll see why in step 4:

2016-07-12 14.36.54

When this die set first came out I wasn’t a fan because all the frames are cut at once.  But then when I saw their Design Team’s cards using these adorable nesting die I had to by a set and now I have all four sets!  The picture below shows the hot pink still in the die and 2 frames I colored from the white cardstock curvy frames.  It also shows the designer paper I thought I was going to use but ended up using something else.  I did however use the one in this photo for the back of the card

2018-01-24 00.42.14

Step 3:  Glue the green frame to the image printed and colored cardstock:

2018-01-24 13.10.02

Notice I haven’t taken the hot pink frames out of the die yet in the above photo?  It’s because as pictured below I knew I was going to use only the negative pcs. of the hot pink set as shown below:

2018-01-24 17.34.24

  Step 4:  Adhere the white frame and the hot pink negative pcs. out of the hot pink die set that matches it’s space.  It may look like they aren’t specific to the spaces but they are.  You would eventually figure it out but this tip saves a lot of time and mistakes.

Step 5:  Now cut with a paper cutter the assembled step 4.  With the die set below and the largest die , cut a white mat adhere your “image sandwich” to this mat as pictured above:

2017-07-30 12.38.42

Step 6:  Create the base card by cutting a 12 x 12″ pc. of White Soft Finish Cardstock to     7″ x 12″.   Score at 6″ on the long side.  Fold over (tent fold) and trim to 7 x 5.75″.

Step 7:  Cut a pc. of Designer paper or cardstock that measures 6.75″ x 5.5″.  Adhere to the front of the base card leaving 1/8″ border all around.  I chose this double sided cardstock from Lawn Fawn.

2018-01-29 13.29.33

Step 8:  Adhere the image sandwich centered over the front of the card.

Step 9:  Cut four corners from the smaller roof embellishment with this die set from Impression Obsession below and add them to the corners as shown.  The little pink heart above the Hedge Hog or Porcupine (not sure which he is)  is one I had in my “extra parts” container.

2018-01-29 13.52.22

That’s It!

Thanks so much for taking a look and I hope you’ll take the challenge and “show us a heart!”  This is the back of this card with designer paper mat I thought I was going to use.

2018-01-29 13.33.01

Other Products Used:

Elizabeth Craft Designs:  White Soft Finish Cardstock 12 x 12″,  Clear Double Side Adhesive 10mm

Sizzix Big Shot Plus

Beacon’s Kids Choice Glue

Copic Markers

PanPastels

Michaels:  Designer paper I used on the back.

 

 

 

 

Dies R Us – Kids Cards!

I decided to enter the current challenge at Dies R Us which is “Kids Cards”.

2018-01-16 DiesRus

The image I chose for this challenge is one called “Peaceful Easter” from The Paper Shelter.  I fell in love with this sweet image of innocence:

2018-01-15 16.46.56

The Steps:

Step 1:  Download, size and print the image.  If you’re new to digital stamps,  the greatest reference on many things about using digital images is from a website called Kit and Clowder.   This is a company that teaches coloring with Markers and Pencils.  They also have areas on their website that have an amazing amount of information on all things coloring!  The below photo shows how I always print out an image that I buy in both the black and white, and color version on one page that I keep in a binder.  It also has the image that I colored with PrismaColor Premium Pencils. 

2018-01-15 16.48.02

After I colored the stamped image I created the background with stencils and PanPastel’s then trimmed the finished image to 5 x 7″ with the stamped image centered:

2018-01-15 16.35.56

Step 2:  Cut 2 rectangle mats that measure 5 x 7″.  One from Designer cardstock and one from white cardstock.  From the Die set below on the right 1113 – Stitched Ovals, center the second to the largest on the Designer cardstock and run through your machine.  From the same die set, center the third to the largest on the white rectangle.  Save the Oval mats for another project because you will use the rectangle mats with the oval cut outs.

2016-11-26-17-11-25Step 3:  Adhere the white mat to this layer. Then, on top. the Designer layer.  The photo below is these 3 layers and the beginning of step 4:

2018-01-16 13.24.10

Step 4:  Cut from white cardstock and color with Copic Markers, all the decorator items as follows:

Peaceful Easter collage

Cut the grass, eggs, bunnies and fence once.  Cut all the Holly Hock pcs. to assemble the holly hock on your card directly and build the plant from the stem up as the picture in step 3.

Step 5:  Assemble the Holly Hock on the left as shown then add the fence, bunnies and eggs on the bottom.

Step 6:  Create a base card by scoring a 8.5 x 11″ at 5.5″ on the long side.  Fold and trim down to 5.5 x 7.5″.  Adhere the assembled front to the base.

That’s It!

Thanks so much for taking a look.  Please follow and leave a comment.  I love to read them and answer any questions.

Other Products Used:

Elizabeth Craft Designs:  White Soft Finish Cardstock White,  Clear Double sided adhesive 10mm

Beacons Kids Choice Glue

Sissix Big Shot Plus

 

Rubber Ducky Day!

Again, who knew there was a “Rubber Ducky Day”?  Well, it’s today!  The challenge this week over at Crazy4Challenges is to put a duck or some other feathered friend on your project.  If you’ve been following, then you know I’m crazy for “The Paper Shelter”.  All through the Holiday Season I was using digital stamps from this company on many of my cards for Christmas.  This “Duck” image is called “Most Adorable Duck“.  I’ve been taking classes from Alyce at Kit and Clowder and applying the great technique’s I’m learning.  Alyce’s  mantra is “Practice, practice, practice”  Note: Whenever I get a new digi stamp I print both the black and white and the colored version.  I then usually copy the artist’s coloring the first time I color an image.  It helps me see where the artist’s light source is coming from:

2017-12-26 12.43.18

The Steps:

Step 1:  Size, print and color the image.  I used Prismacolor Premium Pencils.

Step 2:  Cut out the colored image with Elizabeth Craft Designs: 1116 –  Stitched Circles:

2017-08-29 12.55.26

Apply 250.5 Diarylide Yellow PanPastel with a make up sponge to the edges and blending into the center.

Step 3:  With the largest die in the below set 1254 – Entwined Circles cut one pc. with light blue cardstock:

2017-05-23 13.33.36

Step 4:  From the die set below cut 1 of all 3 of the smaller pcs. from white cardstock and color with Copic Markers :

2017-08-23 20.12.29

Step 5:  Cut both small butterflies 1011 – Garden Notes – Bugs and Butterflies from white cardstock and color with Copic Markers.

Step 6:  The card assembly.

6A:  Make a base card by cutting a pc. of 12″ x 12″ White Soft Finish Cardstock by Elizabeth Craft Designs in half and scoring one half at 6″ along the 12″ side.

6B:  Cut a pc. of designer paper with the largest die from the below set:

2017-07-23 16.40.23

6C:  Adhere this pc. centered on the white card base.

6D:  Adhere the “Duck Image Circle” centered as shown, then the light blue “Entwined Circle”.

6E:  Add the “cattail die pcs. and butterflies” as shown.

That’s It!

Thank you so much for taking a look and I hope you’ll join us over at the “Crazies” challenge.  We can’t wait to see what you create.

Other Products Used:

Beacons Kids Choice Glue

Michael’s:  Designer paper

Sizzix Big Shot Plus

 

 

C4C – 416 Tags for Christmas!

Hi friends!  I hope you had a great Christmas!  This week’s challenge is to incorporate a tag or tags on your project.  My grandchildren are all either teens or adults now so I usually give them money for Christmas.  I had purchased Elizabeth Craft Designs 960 – Tags and More 7 – Vine but hadn’t used it yet.  So I made these huge tags as gift holders for the Grands!  Below is a photo of the backs.

2017-12-25 14.31.28

I have fallen in love with The Paper Shelter’s digital images for Christmas.  These two are called “Santa’s Family Selfie” on the left and “Snowmen Selfie” on the right.

2017-12-27 C4C-416 Tags Challeng

The Steps:

Step 1:  Print out the two digital images on cardstock that is appropriate for what ever medium you will use to color them.   I got a bargain on Amazon for Prismacolor’s Premier 150 count color pencils.  Both of these I colored with my new set.  I watched some lessons over at Kit and Clowder and applied those techniques I learned for these two adorable images.

Step 2:  From and 8.5 x 11″ 110lb. cardstock cut two long rectangles that measure 8.5 x 4″.   Cut two more long rectangles from Designer paper the same size.  Put one white rectangle on top of one designer rectangle. Cut the top of each of these 2 sandwich rectangles with the die pc. that cuts the top edge from the set below.  TIP:  Leave the layers together and run through your cutting machine again removing the previous die and adding one of the  “hole” die pcs.  Use the “hole protector” pc. and cut 4 red hole covers.

2017-12-27 14.27.22

Step 3:  Cut two of each of these dies from green card stock:

Add red/gold glitter dots as shown.

Step 4:  I created the humorous sentiments on my computer, printed them out on light brown cardstock and cut them out with the smallest die from this die set.

2017-07-30 12.38.42

Step 5:  Assemble your tag as shown.  On the “Snowmen Selfie” make a frame from light brown cardstock and square nested dies by nesting two dies and running through the cutting machine.  The size of the two square dies would depend on the size of frame you need to frame your image.  I wanted it to look as if animated snowmen were looking into a window and coaxing my granddaughter to come outside.

Step 6:  Decorate a letter size envelope.  I used this stamp set and a Misti on the flap side:

2017-07-09 16.43.33

I also added some die cut stars and snowflakes I had in my stash.  Adhere the envelope to the back of the tag with ECD Clear Double Sided Adhesive 10mm.  Add glitter lines all around the outside of the envelope.

That’s it!

  These are so fun and easy to make and could be used for cash, gift cards and checks.  A great quick way to make the “gift and card all in one”!

Other products used:

Elizabeth Craft Designs:  Soft Finish Card Stock,  Clear Double sided Adhesive 10mm

Michael’s: Ribbon

Sissix Big Shot Plus

Beacon’s Kids Choice Glue