C4C – 429 Use your dies as stencils!

2018-03-18 C4C 329

 

Well, this was a fun challenge theme because I got to use what is clearly becoming my favorite 2 die sets:  Happy Frame and Happy Frame XL by Elizabeth Craft Designs .

For this project I used the Happy Frame XL

Let’s make this card:

Step 1:  Using the Happy Frame XL die cut 4 times with heavy weight white cardstock.

2018-03-13 19.17.40

Step 2:  Attach a pc. of scrap heavy weight cardstock that’s at least 2 x 4″ to Double sided adhesive.  Secure the longest die from the below die set, sharp edge down on the adhesive side and run through your cutting machine:

2018-03-13 18.37.38

The photo above shows the 730 – Curvy Leaves die set, the stencil I made and another piece of a double sided adhesive I tried this die first as a stencil (that’s why it has ink on it) and the practice piece of cardstock that’s 1″ wide like the Happy Frame is.

Step 3: Cut the frame pcs. to 6″ long on the longest side. With your handmade stencil and stamp pad inks, stencil the Happy Frame pcs. (I applied 2 greens and a brown ink pads:

2018-03-13 18.43.13

Next, using PanPastel’s 780.5 Raw Umber, lightly with a small sponge dauber, distress the entire frame pcs. except the two outside folds as shown below in case it would affect the adhesive when you assemble the frame:

2018-03-13 19.06.36

Now assemble the frame

This is the assembly video link:   Happy Frame assembly video.

Step 4:  Size, print and color with Copic Markers this digital stamp from called “Sunflowers” Di’s Digi Stamps. 

Trim the colored print centered in a 6″ square.

I then went over the print with the same very light touch of Raw Umber PanPastel.

2018-03-14 11.47.41

Step 5:  Cut enough pcs. to make two Sunflowers from this die set (I cut the petal pcs. out 2 or 3 times for each flower just for extras, the seeds pc. twice per flower, and the leaves twice per flower) Cut the leaves from green cardstock and the petals from yellow cardstock and the seeds from dark brown cardstock:

2017-07-17 11.49.37

Sunflower Assembly video

Add color as in the assembly video and shape the parts too:

2018-03-26 14.39.41

Now as in the video build your two sunflowers right onto your assembled frame:

2018-03-26 16.32.09

Step 6:  Add 10mm (1/2″) Clear Double Sided adhesive to the edges of your 6″ colored image square on the colored side.  Now attach it to the back of the frame.

Step 7:  Create a base card by cutting a pc. of 12 x 12″ cardstock in half and scoring one of the halves at 6″.  Fold over.  My choice for base cards if I have the color on hand is Elizabeth Craft Design’s Soft finish cardstock.  I love it’s weight 100lb. and it’s colored on only one side.  When I want to stamp on the inside this is a great benefit:

If you are going to stamp a sentiment on the inside, do it now.

Step 8:  Add Clear Double Sided adhesive 10m to all four front edges of your card base.  Adhere the frame to the card.

That’s It!

Thanks so much again for having a look.  These frames are so fun.  And come back next week for another fun challenge!  Please let me know you were here by leaving a comment.  I love to read them!

Other Products Used:

Elizabeth Craft Designs: Soft Finish Cardstock 12 x 12 Dove Gray and 8.5 x 11 white,  10mm Clear Double Sided Adhesive.

Beacon’s Kid’s Choice Glue

Sizzix Big Shot Plus

 

 

 

C4C – 427 Cutie Patootie Challenge

C4C - 427 Little one

I decided to make an unconventional “baby card”.

I am absolutely crazy for Elizabeth Craft Designs release of their two Happy Frame die sets.  For this DT card I used this set:

2018-03-07 14.09.27

Let’s make this card:

Step 1:  I found this adorable digital stamp, at Di’s Digi Stamps. 

(You go straight to her online store by clicking on the blue link above)

2018-03-09 22.14.41

It’s called “Hello Bumblebee”.  Size, print and color the image.  I colored it with Copic Markers.  I added shading to the background with PanPastels.  Cut out your colored image with the 3rd. to the largest die in the below set on the left.  Then cut a brown mat with the 2nd to the largest die in the set on the right.  Adhere the stamped layer to the brown scalloped mat:

Step 2:  Cut out the die four times out of wood look cardstock. from the set called Happy Frame from Elizabeth Craft  Designs.  (pictured above with link to the store in blue.)  I chose a piece from this paper pack:

2018-03-07 14.10.02

Here is the assembly video: Happy Frame assembly video

Note: Cut your four frame pcs. to 6.25 x 6.25″.  Your finished frame will be a 6.25″ square.

Step 3:  Using the dies on the far right below cut two pink and two white layers for a small pink daisy and white daisy.  Repeat for a smaller daisy of each color.  Cut the circle center pc. for the daisies with the pc. shown below on the right side of the picture below:

2018-03-15 20.11.05

This set is from Docrafts and is called: Glorious Gerbera.  I added a little darker pink Copic marker from the middle out to the pink daisies.

Cut the leaves only (two of each) from this set: 1368 – Garden Notes – Dahlia:

2018-03-18 19.09.18

Cut two of the longer die from this set:

2016-03-28 13.50.59

Cut enough of the “bee parts” to make 3 bees from this set:

2017-07-17 12.19.56

Stamp the sentiment on white cardstock from this stamp set below:

2018-03-12 22.50.53

Cut out sentiment with the 2nd to the smallest die in this set from QuicKutz:

2016-07-24 12.16.08

I used PanPastels to add a little blue color to the edges.

Choose a designer paper and cut a square that measures 6.25″ x 6.25″.

2018-03-09 22.13.44

Step 4:  Adhere the designer square paper behind the wood frame.  Adhere the image stack to the center and then decorate the frame as shown.

Here’s a look at the inside of the card:

2018-03-22 21.55.27

It was made by creating a base card by scoring a pc. 12″ x 6″ pc. white cardstock at 6″.  Then fold over.  Attach two squares of the same designer paper.  Then I added charm dies, banners and the word Congratulations from these dies.

That’s it!

Thanks so much for taking a look.  I know you’re time is valuable so I appreciate it.  I can’t wait to see what you make if you choose to take the challenge!

Other Products Used:

Elizabeth Craft Designs:  Soft finish Cardstock White 12 x 12″,  Clear Double Side Adhesive 10mm

Joanne Fabric and Crafts:  Baker’s twine

Michaels:  Recollections: Pink Wood Planks

Beacon’s Kids Choice Glue

Sizzix Big Shot Plus

 

Di’s Digis – Another resource for Adorable!

This week’s challenge over at  C4C – 423 Crazy 4 Challenges is to make a card with a yummy dessert on it!  My Design Team inspiration card this week is one of several images I bought from a digital stamp designer that is new for me.  On the Kit and Clowder Facebook Page I saw one of the Clowdies posted a card made with an image I just loved.  So much so I went over to Di’s Digi Stamps  and bought several digital stamps.  I chose this one for my card. It’s called “Ellies strawberry cupcake”

2018-02-20 19.12.26

I mean seriously, how cute is this!  Please, if you like digital stamps, and you love “cutsie” like me, do yourself a favor and look around this site.  I’ll be featuring the others in the next few week’s (again, I am not compensated in any way by my referrals.  I just love to pass on to you what I call a “SCORE”!  Here’s the link Di’s Digi Stamps

Let’s make this easy  card

The Steps:

Step 1:  Size, print and color the image.  I colored with Copic Markers.  I also added “Chrystal Lacquer” to the elephant’s eyes and the dripping chocolate and cherry available at Amazon.  Now cut out the image using the third to the largest die in the set below  from Elizabeth Craft Designs.

2017-12-04 15.04.47

Step 2:  Using the same die set pictured above, cut a lavender cardstock mat using the second to the largest die.

Step 3:  Cut a mat out of darker lavender or purple cardstock using the largest die from the set below:

2017-07-30 12.38.42

Step 4:  Using the die set below cut all the pieces to make the smallest strawberry and the small leaves.

2016-07-06 21.57.43

Step 5:  Cut the pieces of one of the cup cakes from this die set below:

2017-08-16 13.10.32

Step 6:  Cut the word Celebrate from the die set below:

2018-02-22 19.43.57

Step 7:  Make the base card by scoring an 8.5″ x 11″ pc, of white cardstock at 8.5″ on the long side.  Fold over and trim to 7″ x 5.5″.  Now cut a rectangle from designer paper that measures 6.75″ x 5.25″.   Now assemble all the elements (pic. below) to the front of your base card.  Note: I added a little flower to the strawberries with a die referenced in the other products used.

That’s it!

Thanks so much for taking a look and I hope you’ll make a card for this week’s challenge.

Other products Used:

Elizabeth Craft Designs:  White Soft finish Cardstock, 1181 Pinwheel (little white flower on strawberries), Clear double sided Adhesive

Beacons Kid Choice glue

Sizzix Big Shot Plus

 

 

 

 

%d bloggers like this: