Vellum Butterflies and Flowers

Butterfly wood h20 (2)

This week’s challenge is to put some wood or wood look to your project over at: Crazy4Challenges

I fell in love with this pink wood look paper from Michael’s Craft Store.  I have used it on several projects.  Here’s a little “keepsake” baby card I made for a friend’s granddaughter with this same paper on the front and inside.

C4C - 427 Little one  2018-03-22 21.55.27

Here’s the steps to how I made the card for this week’s challenge.

The Steps:

Step 1: The card measures 5.25″ x 7.25″.  So score an 11 x 8.5″ piece of white card stock at 5.5″.  Fold for a “book fold” and trim to the finished size.  Cut a pc. of designer paper that measures 5 x 7″ and adhere to the front of the card.  Using the largest die from the set below, cut an oval from pink card stock.  Adhere this oval to the front of the card (centered). 1113 – Stitched Ovals

Stitched Ovals

Step 2:  I love the look of using Vellum with dies that have a silhouette pc. and an overlay pc.  I think it gives them a sort of ethereal look.  Plus, vellum comes in several colors, like pink, yellow and pastel blue and lavender.  I used white  and these two die sets.  I cut 3 of the overlay (fancy one) and body pc. from white card stock.  I cut 3 of the silhouette with the vellum.  Then adhere the fancy winged layers to the vellum layers.

1072 – Small Butterfly

Small Butterfly

Step 3:  I used a die set from Elizabeth Craft Designs that apparently has been retired.  But it was called 901 – Daisy.  I’m glad I got one because I love this set.  But it is an older one.  I cut 3 daisy silhouettes from vellum, 3 overlays and leaves from white card stock and the flower centers from pink card stock that I used for the oval.

2018-07-21 14.30.05

Step 4:  Using the die set below, I cut one bucket piece and 2 handle pieces from white card stock.  I colored the bucket piece and 1 handle piece with PanPastel Silver Metallic.  The other handle piece I colored only the beaded area with a Copic Marker and then cut the part away from the rest of the handle.  Then I glued this piece to the silver handle pc.

Garden Notes - Galvanized Bucket

Step 5:  The sentiment is this die cut once with dark brown card stock and once from a little darker pink card stock then the oval.  Glue the pink over the brown, slightly offset.

1288 – Thanks

Thanks

Step 6:  Now just arrange all the above elements how you like them.  Here’s another quick look at this card:

Butterfly wood h20 (2)

Thanks to YOU for stopping by for a look and here again is the link to the challenge.  This one is fun because you can really make anything, with any theme, as long as you throw a little wood on it!

Other Products Used:

Michael’s Craft Store:  Card stock

Sizzix Big Shot Plus

Beacon’s Kids Choice Glue

For Unconditional Love…

May sketch h2o (2)

May sketch inside

It’s sketch week!

I usually like to show the sketch but for some reason I was unable to cut and paste.  However, here is the link to the blog:  Crazy4Challenges

My granddaughter runs a kitten rescue called “The Kitten Stage”, so I made this in honor of what she does.

The Steps:

Step 1:  To make the “two triangles” base, I used a double sided card stock from LawnFawn.

Step 2:  I used Elizabeth Craft Designs:  1116 – Stitched Circles.

Stitched Circles

Using white card stock, cut two circles using the second to the smallest die in the set above.  I then created the front sentiment on my computer and cut it out with the third to the smallest in the same set.

Step 3:  I used these two die sets from Frantic Stamper for the little dog and cat.  I cut them from white card stock and colored them a bit with Copic Markers.  Then I adhered them to the two smallest circles.

Frantic Stamper dies

Step 4:  The card measures 5.5″ x 5.5″.  So score a 11″ x 8.5″ at 5.5″.  (First, create the inside sentiment on your computer and print out on white card stock for the base) Fold over and trim to a 5.5″ square.  This is the step that using a double sided card stock is great.  I just cut a 5.5″ square and cut it in half on the diagonal.  Then I just flipped one to the other side for a perfect two triangle base.  Adhere the two triangles to the white base card and add the 3 circles as shown.  I added a bakers twine bow.

That’s It! Here’s one more look:

May sketch h2o (2)

May sketch inside

Thanks so much for taking a look.  This is an easy sketch, so jump in there and show us what you got!  Here’s the link:  Crazy4Challenges

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

New Month – New C4C Challenge

feb 2 c4c hedgehog front h2o

A new month and a new challenge over at:  Crazy4Challenges

This month I am the hostess all month!  Which just means it’s my turn to come up with some fun challenges for the month of February.  Today is Ground Hog Day so the challenge is to put a ground hog or any other ground critter on your card.

I don’t have a Ground Hog but I do have a Hedge Hog!  This card is easy!

The Steps:

Step1:   I cut the body of the hedge hog pc. and apple pc. from white card stock, the leaves from green card stock and the spiky pc. from brown card stock.  I colored the body pc. and the apple with Copic Markers.  I sponged a darker brown ink on the edges of the spiky pc.  Assemble the hedge hog and adhere the leaf to the apple.

Step 2:  Out of a strip of green card stock that measures 1 x 6″ I cut a grass strip edge die that is discontinued but here is one that would create the same effect. :1388 – Adventure Edges – 3 die set

The clouds are from a discontinued Karen Burniston die set called “The All Season Tree”.

The “Hello” sentiment is Lawn Fawn’s:  Skripty Hello

scripty hello

I use this die so often that I don’t even put it away.  I cut it 3 times and adhered the 3 together to make it dimensional.

Step 3:  Make a base card by scoring an 8.5 x 11″ pc. of white card stock at 5.5″ on the long side.  Fold and trim to a 5 x 6.5″ with a tent fold.

Step 4:  Cut a mat that measures 4.75″ x 6.25″ from a print card stock you like.  I used Elizabeth Craft Designs: Thinking About Polinesia

Using the largest die from Elizabeth Craft Designs: 1120 – Stitched Rectangles  Cut a mat from from a light blue card stock.

Step 5:  Assemble the card.  Adhere the printed mat to the front of the card base.  Next adhere the die cut light blue mat over the printed one.  Adhere the “grass edge” just above the stitch line of the blue mat.  Now add the rest of the elements as shown:

feb 2 c4c hedgehog front h2o

I adhered the apple, hedge hog and clouds with foam dots and the “hello” sentiment with Beacons Kid’s Choice Glue.

That’s It

Thanks so much for stopping by.  I’d love to see your ground critter card!

Other Products Used:

Sizzix Big Shot Plus

Michaels:  Recollections Paper Packs

Make a Humorous Card!

snowman front h2o

snowman inside

I’ve had this digital stamp for years and have used it a few times.  It is called “Snow Fun” and is by Dr. Digi.  Snow Fun

snow fun (1)I love digital stamps because you can make them any size you want,  you can put backgrounds behind them, they print perfectly the first time, you can buy them pre-colored, and you don’t have to clean or store them!

The Steps:

Step 1:  Size, print and color with the medium of your choice.  I colored mine with Copic Markers.

Step 2:  I used the 4th to the largest die to cut the colored image from this set by Elizabeth Craft Designs: 1116 – Stitched Circles

Garden Notes -  Frame It/ Stitched Circles

Step 3:  Use the 3rd to the largest die in the same set to cut a slightly larger circle for a mat for step 2.  Adhere the “image circle” to the blue circle.

Step 4:  Cut two each of the largest and smallest dies, out of wood look cardstock from: 1254 – Entwined Circles Glue the two of each together ending up with one of each but  thicker, which gives it more dimension.  Cut the little snowflake out 8 times.  Note:  The dies in this set will cut through two layers of cardstock at once.  You can always run it through your die cutting machine twice to make sure, as they are intricate.

Entwined Circles

Step 5:  Create the sentiment in word, “Just stopped by to say “Hay” and print on white cardstock.  Cut out with the 3rd die to the smallest in the same set as in step 2 and out of the same blue cardstock and the 4th to the smallest cut a blue mat.  Adhere the sentiment circle to the blue circle.

Step 6:  Make a base card by scoring an 11 x 8.5″ pc. of white cardstock at 5.5″ on the long side.  Trim to 5 x 7″ with a book fold.  Cut a rectangle from a designer paper that looks wintery and measures 4.75 x 6.75″.  Adhere this rectangle to the front of the base card.  Optional Note:  I created in word, the inside sentiment and printed it on white cardstock first.

Step 7:  Adhere the matted larger “image” circle to the top half of the front but make sure you leave room to layer on the “Entwined Circle” as shown:

snowman front h2o

Then adhere the Entwined circle over the top.  Repeat for the smaller “sentiment” circle in the lower left of the card.

Step 8:  I added clear Wink Of Stella to the snowflakes and a silver clear glitter dot to the center of each.  Glue the snowflakes as shown.

Here’s one more look:  snowman front h2o

Thanks so much for stopping by and we’d love to see your sense of humor this week!

Other Products Used:

Sizzix Big Shot Plus

Beacon’s Kids Choice Glue

C4C – Make a CAS card

Elephant 1 H2OElephant 2 inside

In honor of “Use less day”, the challenge is to make a one layer card.  Yay!  Bring out the stamps!  I chose this oldie but goodie set from Inky Antics:

Inky Antics

The whole time I was making this card, I was thinking about my friend Carlene, that I met on a  crafting Facebook page the day they launched it.  We knew immediately we thought the same way about a lot of things.  We have been emailing each other for years now.  One of the things we had in common, is that we both loved and bought several of these stamp sets.  They all come with a stamp that you use on Honey Comb paper and then cut out for the inside of the card.  In this set, it’s the balloon on the inside.  They make a cute card with a little surprise inside and are quick and easy!

In fact, that’s it.  You stamp, color and install the surprise inside and you’re done!

Other products used:

Misti

Copic Markers

Beacons Kids Choice Glue

%d bloggers like this: